Dyeing Research Articles

Genome-Scale Investigation of the Regulation of azoR Expression in Escherichia coli Using Computational Analysis and Transposon Mutagenesis

Bacterial azoreductases are enzymes that catalyze the reduction of ingested or industrial azo dyes. Although azoreductase genes have been well identified and characterized, the regulation of their expression has not been systematically investigated. To determine how different factors affect the expression of azoR, we extracted and analyzed transcriptional data from the Gene Expression Omnibus (GEO) resource, then confirmed computational predictions by quantitative reverse transcription polymerase chain reaction (qRT-PCR). Results showed that azoR expression was lower with higher glucose concentration, agitation speed, and incubation temperature, but higher at higher culture densities. Co-expression and clustering analysis indicated ten genes with similar expression patterns to azoR: melA, tpx, yhbW, yciK, fdnG, fpr, nfsA, nfsB, rutF, and chrR (yieF). In parallel, constructing a random transposon library in E. coli K-12 and screening 4320 of its colonies for altered methyl red (MR)-decolorizing activity identified another set of seven genes potentially involved in azoR regulation. Among these genes, arsC, relA, plsY, and trmM were confirmed as potential azoR regulators based on the phenotypic decolorization activity of their transposon mutants, and the expression of arsC and relA was confirmed, by qRT-PCR, to significantly increase in E. coli K-12 in response to different MR concentrations. Finally, the significant decrease in azoR transcription upon transposon insertion in arsC and relA (as compared to its expression in wild-type E. coli) suggests their probable involvement in azoR regulation. In conclusion, combining in silico analysis and random transposon mutagenesis suggested a set of potential regulators of azoR in E. coli.

Enhancing the Sustainability and Hygiene in the Dyeing of Wool Yarns with Prangos ferulacea Aerial Parts Extract in Conjunction with Metal–Biomordant Combinations

Enhancing the Sustainability and Hygiene in the Dyeing of Wool Yarns with Prangos ferulacea Aerial Parts Extract in Conjunction with Metal–Biomordant Combinations

Structure-led manifestation of photocatalytic activity in magnetically recoverable spinel CuFe2O4 nanoparticles and its application in degradation of industrial effluent dyes under solar light

An efficient removal of the photocatalysts used in the decontamination of water is crucial after its application beside its expected visible light sensitive activities. This study presents the synthesis of magnetically separable CuFe2O4 nanoparticles (CFNPs) with enhanced photoactivity under AM 1.5 G sunlight. A simple two-step process involving co-precipitation and hydrothermal treatment is employed, with subsequent annealing at temperatures from 200 °C to 1000 °C to synthesize the CFNPs. The characteristic features of the highest photoactive tetragonal phase of CFNP are confirmed by powder XRD studies with Rietveld refinement. This scheme strategically controls the growth of a highly photoactive tetragonal phase with predominant (224) facets over other less active facets in cubic CuFe2O4. Mott–Schottky analysis confirms the p-type semiconducting nature of CFNPs. A favourable direct optical band gap of 1.73 eV, as well as photoluminescence emission quenching for visible photons, show that the (224) oriented CFNPs are good photocatalysts in the visible spectrum with demonstrated organic dye degradations, including methylene blue and others. A density functional theory-based approach validates that the adsorption of such dye is thermodynamically more favourable on (224) facets of CuFe2O4 to facilitate the redox action by the excitons.

Feasibility and sludge analysis of electrocoagulation process for Direct Violet-35 dye remediation

The present study investigates Direct Violet-35 (DV-35) remediation using electrocoagulation process. DV-35 which is an industrial azo dye, after release significantly affects the visual appearance of water bodies and hinders the process of photosynthesis affecting plant growth. Perturbing the food chain, it promotes toxicity, mutagenicity, and carcinogenicity. Therefore, dye remediation is essential before discharge into water streams. To determine the effectiveness of the electrocoagulation process for DV-35 dye remediation, and understand the influence of parameters like current density, inter-electrode spacing, concentration of electrolyte, pH, agitation speed, and initial dye concentration, a detailed study was carried out. Maximum removal efficiency (>98 %) was achieved in 16 min at 263.15 A/m2 current density and pH 7.2 for DV-35 concentration of 50 to 500 mg/L. Further, optimized parameters were applied to real textile effluent achieving 99.8 % efficiency. EC mechanism was corroborated by Sips isotherm matching adequately with experimental results. The findings also demonstrated a heterogeneous surface of the produced EC flocs. Pseudo-second-order was obtained with a low operating cost of 0.0018 US $/m3. The DV-35 removal and functional groups were confirmed by UV/VIS and Fourier transforms infrared spectroscopy analysis. The sludge was examined by X-ray Diffraction and Scanning Electron Microscope revealing Crystalline aluminum oxides i.e. bayerite (Al(OH)3) and diaspore (AlO(OH)). The conclusion of the results revealed EC to be an effective and economical technique for DV-35 remediation from textile wastewater.

Archaeological Traces of Pre-industrial and Industrial Dyeing Workshops in the Czech Republic

ABSTRACT Archaeological research into industrial heritage is a relatively recent field of study in the Czech Republic. During the past six years, several historical textile production facilities (including five dyeing workshops) have been uncovered as part of preparatory work for construction projects in areas traditionally associated with the textile industry. Following excavations, these facilities have been the subject of interdisciplinary research. This article presents a comprehensive account of its findings. The introductory part traces the historical development of the textile industry in what is now the Czech Republic. The article then presents the results of research carried out at sites in Brno, Úštěk and Krnov, documenting the possibilities of rescue archaeology and non-destructive surveys as well as tracing this type of workshop’s heating units evolution, providing a comprehensive overview of industrial dyeing in the territory of the present-day Czech Republic during the 18th and 19th centuries.

Submerged photosynthesis of TiO2-CuO hetero-nanoparticles and their multiple applications for water issues under solar light

Environmental challenges, encompassing issues like agricultural ammonia discharge, industrial organic dye misuse, and high environmental polluted water evaporation, demanded urgent attention. In response, we proposed a method for synthesizing TiO2-CuO hetero-nanoparticles capable of different environmental protection commands. Submerged Photosynthesis of Crystallites (SPSC) was adopted due to its simplicity and eco-friendliness. Hetero-nanoparticles with varying Cu-Ti ratios were prepared, characterized, and assessed. CuO dispersion within TiO2 proved consistently even. Increasing Cu content increased Cu-Ti ratio until reaching an upper limit. All nanoparticle samples demonstrated excellent solar light absorption. Combining solar illumination and electrochemical techniques synergistically boosted pollutant degradation. The nanoparticle with a Cu-Ti ratio of 0.17 exhibited optimal photo-electrochemical degradation, enhancing efficiency by 150% under solar light compared to darkness. It also outperformed solar light alone by 32% and electrochemistry alone by 2% in RhB degradation. Furthermore, it enhanced water evaporation rate under solar light. The nanoparticle with a Cu-Ti ratio of 0.52 was the highest water evaporation rate, increasing up to 104% compared to the control group. We discussed the mechanisms underlying fabrication and degradation, elucidating the observed performance. In conclusion, our research underscored the potential of TiO2-CuO hetero-nanoparticles for solar-assisted solutions to different environmental issues, highlighting their environmental applicability.

Optimization and modelling of magnesium oxide (MgO) photocatalytic degradation of binary dyes using response surface methodology

Textile industry dye effluent contains a mixture of different kinds of dyes. Many times, photocatalysis is targeted as a solution for the treatment of dye effluent from the textile industry. Many researches have been published related to the photocatalysis of single textile dyes but in the real-world scenario, effluent is a mixture of dyes. Magnesium oxide (MgO) is used as a photocatalyst to treat a mixture (binary solution) of Methylene blue (MB) and Methylene violet (MV) along with individual MB and MV dyes in this article. MgO shows remarkable photocatalytic activity at about 93 and 88% for MB and MV dye in binary solution within 135 min. Furthermore, to study the influence of process parameters, experiments are designed with the help of the central composite design (CCD), and Response surface methodology (RSM) is used to study the interactions between parameters. For this study, five parameters are selected i.e., Photocatalyst dosage, initial concentration of both dyes, time of exposure to the light source, and pH of the binary solution. The photocatalytic process is also optimized and finally optimization of process parameters is validated with an experiment. The result of the validation experiment is very close to the predicted photocatalytic activity.

MnFe2O4-NH2-HKUST-1, MOF magnetic composite, as a novel sorbent for efficient dye removal: fabrication, characterization and isotherm studies

Dye in industrial wastewater is one of the most serious environmental concerns due to its potentially harmful effects on human health. Many industrial dyes are carcinogenic, toxic and teratogenic. Removal and recovery of hazardous dyes from the effluents requires efficient adsorbents. In this study, magnetic adsorbent MnFe2O4-NH2-HKUST-1 was synthesized to remove methylene blue and crystal violet dyes from aqueous solutions. The synthesized adsorbent was characterized using FTIR, XRD, BET, VSM, SEM, TGA and Zeta potential techniques. The effect of different parameters such as pH, contact time, and adsorbent dosage on the removal of dyes was investigated. The dye adsorption process was investigated by UV–Vis spectrophotometry. The maximum adsorbent capacity was obtained as 149.25 mg/g for methylene blue and 135.13 mg/g for crystal violet. The adsorption equilibrium isotherm and kinetic models were plotted and results showed that the adsorption process for both dyes is a collection of physical and chemical adsorption based on langmuir and freundlich isotherm models, and follows the pseudo-second-order adsorption kinetics. This study shows that magnetic adsorbent MnFe2O4-NH2-HKUST-1 has a good potential for removal of methylene blue and crystal violet dyes from water in a short time (5 min) and it is easily separated from the solution by a magnetic field due to its magnetic property.

Comprehensive study of Fenton reaction efficiency on textile wastewater treatment from dye solution to real effluent with emphasis on Fukui function analysis

This study investigated the continuous degradation monitoring of three reactive dyes, reactive yellow 176 (RY), reactive Blue 4 (RB) and reactive red 293 (RR), both in separate solutions and in a mixture, along with their corresponding dye bath and industrial dyeing effluent, using Fenton reaction. A kinetic study was conducted to compare the degradation efficiency of the studied solutions. This work provides important yield of dye degradation, where the results showed that RB, RY, and RR had 96.64 %, 92.47 %, and 73.27 % color removal, respectively, within a two-hour reaction time. The pseudo-second-order model fit well to describe the degradation of RR and RY, while the zero-pseudo-order model provided a better fit for RB. The dye mixture exhibited 57 % color removal, whereas the dyeing bath and real effluent showed 41 % and 36 % removal, respectively, over a two-hour reaction time. Moreover, significant reductions in chemical oxygen demand (COD) and biological oxygen demand over 5 days (BOD5) were observed, with the real effluent demonstrating a 73.91 % COD reduction and an 86.66 % reduction in BOD5. The COD and BOD5 reductions for the dye bath were 67.53 % and 95 %, respectively. Additionally, COD and BOD5 reductions of 72.96 % and 96.66 %, respectively, were observed for the dye bath. DFT calculations were employed to elucidate the regioselectivity of radical oxidation of the three reactive dyes by Fenton's reagent, providing insights into global and local reactivity descriptors. Toxicity studies further underscored the efficacy of the Fenton reaction in wastewater treatment. Additionally, UV–visible spectral analysis before and after 12 h of Fenton reaction revealed total discolouration and a reduction in UV and visible peaks across all reactions, indicating comprehensive dye degradation and reduction.

Investigation of process parameters for eco-friendly indigo dyeing of cotton fabric with reducing sugars

Purpose The application of indigo dyes in the denim industries has been criticised due to the introduction of non-renewable oxidation products into the environment. Previous studies have investigated that reducing sugars can be used as green alternatives to sodium dithionite in the indigo dyeing of cotton fabric owing to their reduced and stable redox potential in the dye bath. The purpose of this study was to dye denim cotton fabric with indigo dye using various reducing sugars and alkalis. The use of sucrose and potassium hydroxide (KOH) for indigo dyeing has been explored for the first time. Design/methodology/approach A mixed factorial design with four variables including alkali, pH, number of dips and type of reducing sugar at different levels was studied to identify a significant correlation between the effect of these variables on the colour strength and fastness properties of the dyeings. Findings Investigations were made to examine the significant factors and interactions of the selected responses in the eco-friendly dyeing method. This process has the potential to reduce the load of sulphite and sulphate generated in the dyebath due to the use of a conventional reducing agent, sodium dithionite. The colour strength of the dyeing reduced with fructose was found to be better than other reducing sugars and significantly influenced by the number of dips, pH levels and the interaction between pH and reducing sugars. Using fructose for indigo dyeing with two dips at a pH of 11.5, using KOH as an alkali, results in higher colour strength values. The fastness properties of the indigo-dyed sample with reducing sugars ranging from fair to good or good to excellent. Specifically, colour change receives a rating of grey scale 3–4, staining 4–5, dry rubbing 4 and light fastness 3–4. These assessments hold true across various factors such as the type of reducing sugar, alkali, pH and the number of dips. The optimised parameters leading to improved colour strength and fastness properties are also discussed. Originality/value This dyeing technique is novel and a green alternative to dithionite denim dyeing. This process is found to be useful for indigo dyeing of denim fabric leading to reduced and stable redox potential in the dyebath and acceptable colour strength of the dyed fabric.

Transforming waste cellulosic fabric dyed with Reactive Yellow C4GL into value textile by a microwave assisted energy efficient system of color stripping

A million ton of cotton fabric is wasted during cutting process in garment industry as well as in textile dyeing industry due to faulty dyeing. Color stripping of cotton fabric has become a significant challenge in the textile industry because the harsh chemicals used in chemical stripping processes affects the quality of fabric very badly. Conventional stripping methods lead with severe effects due to prolonged treatment time and high chemical concentrations. Recently, microwave-assisted stripping techniques have been emerged as effective alternatives to improve stripping efficiency. In this research, the developed microwave assisted stripping system is improved by the application of Urea, which is utilized as a microwave absorber to further reduce stripping time, temperature, and chemical concentration kept focus on quality parameters of recycled cotton fabric. This study inspects the efficiency of microwave absorber-assisted alkali hydrolysis and reduction in terms of dye-fabric bond cleavage, chromophores removal, chemical consumption, and processing time and compared with sequential stripping, microwave assisted stripping without absorber and conventional methods. The results indicated that microwave absorber-assisted alkali hydrolysis and reduction achieved 90 % stripping efficiency by using lowest concentrations of chemicals, while sequential stripping yielded a stripping efficiency of 96 %. Similarly, microwave absorber assisted methods resulted in minor loss in tear strength and weight. These outputs highlight the superior performance of microwave absorber-assisted techniques, demonstrating their efficiency, novelty, time-saving nature, and reduced damage compared to other methods.

Advances and Feasibility of Biocatalytic Technologies for Dye Removal

The expanding dye and dye-related industries have led to the production of large volumes of dye-containing wastewater streams. Without adequate treatment, the wastewater could pollute the environment and give rise to health concerns. Biocatalytic technologies provide a channel of treating the wastewater. These technologies involve immobilizing dye-degrading enzymes particularly laccase and peroxidase, and microorganisms on or in suitable supports to enhance their activities, stability, efficiency, and recyclability. This review provides the latest advances in biocatalytic technologies for dye removal and their feasibility. Based on this review, laccase has been immobilized on supports comprising PEDOT-PPy-COOH/Pt, nanocellulose from quinoa husks, calcium alginate, delignified spent grain, polymeric membrane, and metal-organic frameworks to treat different dyes with efficiencies ranging from 39% to 100%. Peroxidase has been immobilized on calcium alginate, Fe3O4 nanoparticles, cationic maize starch, and graphene oxide-SiO2 for treatment of various dyes with efficiencies in the range of 40–100%. The dye-degrading ability of azoreductase is often harnessed through immobilization of microbial cells which contain multiple enzymes in them and are frequently able to decolorize more than 90% of the dyes tested. An immobilized azoreductase has been successfully produced but showed lower dye-degrading efficiencies of 18.3–58.3%. The performance of biocatalysts can be affected by multiple factors, making optimization of the operating conditions important. The use of green support materials could reduce the cost of biocatalysts and the associated environmental concerns. A versatile biocatalyst or biocatalyst mixture is beneficial to degrade the complex pollutants in dye-containing wastewater.  

Sorption capacity of Eichhornia crassipes (Mart.) Solms for zinc removal from electroplating industry wastewater.

Various industrial operations in the dye, fertilizer, pesticide, battery, mining, and chemical industries have been associated with releasing heavy metals in wastewater, such as lead, zinc, copper, arsenic, cadmium, chromium, nickel, and mercury. These metals are dangerous to aquatic life as well as to humans, who may consume them directly or indirectly. Therefore, before being released into open water and land resources, it is necessary to minimize the concentration of toxic ions below the discharge limit. This study used Eichhornia crassipes (Mart.) Solms to remove zinc from wastewater from the electroplating industry in a constructed wetland. Experimental investigations were conducted for removing zinc ions from electroplating industry wastewater using various process parameters such as nutrient dosages, dilution ratios, potential of hydrogen ions, biomasses, and contact times. The outcome of this study revealed that the maximum zinc removal percentage in electroplating industrial wastewater was found for the optimum nutrient dosages of 60g, dilution ratios of 10, potential hydrogen ion levels of 8, and biomass amounts of 100g. The maximum zinc removal by Eichhornia crassipes (Mart.) Solms was found to be 88.3 ± 0.6 and 93.4 ± 0.4% at the optimum parameter values for the electroplating industry wastewater and the aqueous solution, respectively, against the optimum contact time of 22days. This study suggests using this phytoremediation technology to remove all pollutants from industrial wastewater in general, not just wastewater from the electroplating industry.

Enhancing Methylene Blue Removal through Adsorption and Photocatalysis-A Study on the GO/ZnTiO3/TiO2 Composite.

This study focuses on synthesizing and characterizing a graphene oxide/ZnTiO3/TiO2 (GO/ZTO/TO) composite to efficiently remove methylene blue (MB) from water, presenting a novel solution to address industrial dye pollution. GO and ZTO/TO were synthesized by the modified Hummers and sol-gel methods, respectively, while GO/ZTO/TO was prepared using a hydrothermal process. The structural and surface properties of the composite were characterized using various analytical techniques confirming the integration of the constituent materials and suitability for dye adsorption. The study revealed that GO/ZTO/TO exhibits an adsorption capacity of 78 mg g-1 for MB, with only a 15% reduction in adsorption efficiency until the fifth reuse cycle. Furthermore, the study suggests optimal adsorption near neutral pH and enhanced performance at elevated temperatures, indicating an endothermic reaction. The adsorption behavior fits the Langmuir isotherm, implying monolayer adsorption on homogeneous surfaces, and follows pseudo-second-order kinetics, highlighting chemical interactions at the surface as the rate-limiting step. The photocatalytic degradation of MB by GO/ZTO/TO follows pseudo-first-order kinetics, with a higher rate constant than that of GO alone, demonstrating the enhanced photocatalytic activity of the composite. In conclusion, GO/ZTO/TO emerges as a promising and sustainable approach for water purification, through an adsorption process and subsequent photocatalytic degradation.

Degradation of textile polyazodyes by Polyporus ciliatus laccase produced in peanut shell solid medium: purification and characterization

This study describes decolorization of reactive sulfonated azoic dye Direct Blue 71, one of the recalcitrant and highly used industrial dyes, by Polyporus ciliatus derived laccase. Agro-industrial wastes are increasingly used as substrates for laccase production from white rot fungi through solid-state fermentation (SSF). Peanut shell (PS) is an attractive substrate for laccase production, and SSF is an adequate strategy for that purpose. It has been employed as a novel support-substrate for laccase production by Polyporus ciliatus under solid-state fermentation. The highest laccase yield of 1260 U/ml was attained using PS after 13 days of incubation at 30°C. The purified laccase (55 kDa) showed maximum activity at pH 3 and 60°C. The extracellular laccase enzyme was purified 67.6-fold to a specific activity of 1466 U/mg by a Mono-Q anion-exchange column. The purified enzyme Km value was found to be 24 µM, while the Vmax value was observed to be 0.96 µM s-1 with ABTS as a substrate. It had high thermotolerance and pH stability and was resistant to several metal ions including copper, cadmium, and iron. P. ciliatus pure laccase showed high potential for the decolorization and detoxification of the reactive sulfonated azoic dye Direct Blue 71, which suggested that this enzyme could be used for textile effluent treatment.

Extraction of Natural Dyes, Characterizations and their Ecofriendly Applications

Natural dyes produce an extraordinary variety of products and complex colors that complements each other. Straight off a day synthetic dye leads to high environmental pollution. In recent year, the interest of researchers has changed over on utilizing natural dyes in textiles, food and cosmetics industries. Natural dye sources are eco-friendly and permanent in fabrics. The present study focused on the extraction of dyes from plant materials such as leaves, tubers and flower plants. The obtained dyes yield a variety of colors and are processed with different types of mordants such as aluminum acetate and cream of tartar. In this artical, our research focus on synthesis of azo dyes and compare it with natural dyes. We extracted number of natural dyes and find out of application in dying field. Natural dyes worldwide should be increased to prevent us from pollution and other harmful effects.

Synergistic removal of toxic anionic reactive red dye Me4BL (RRME4BL) from aqueous media using chemically synthesised nano-adsorbents (ZnO, CuO, NiO and CoO); equilibrium, kinetics and thermodynamic studies

ABSTRACT This study explores the efficient removal of the synthetic anionic dye-reactive red Me4BL (RRMe4BL) from an aqueous medium which is a significant contributor to environmental pollution. The present study investigates the synthesis of zinc oxide, nickel oxide, cobalt oxide and copper oxide nano adsorbents (ZnO (II), NiO (II), CoO (II), CuO (II)) through the co-precipitation method and their effectiveness in eliminating the reactive red dye Me4BL(RRMe4BL). Maximum adsorption capacities were achieved at pH 2 for ZnO (96.1 mg/g), NiO (86.9 mg/g), CoO (93.4 mg/g) and at pH 6 for CuO (76.3 mg/g) under a 0.05 g/50 mL nano-adsorbent dose, 50 mg/L dye initial concentration and 25°C T and 90 min of contact time. The fitness of the pseudo-2nd-order model explained the kinetics, while Langmuir and Temkin adsorption isotherm highlighted the efficiency of the dye adsorption. Thermodynamic studies revealed the spontaneous and exothermic nature of adsorption. The influence of electrolytes, surfactants and desorption was also analysed. Characterisation of the nanoparticles was done through SEM, XRD and FTIR which revealed the morphology and functional groups of nano-adsorbents. The adsorption method used for eliminating this anionic red dye shows several benefits, including affordability, simplicity of use and the presence of intelligent adsorbents for environment-friendly removal of industrial dyes from wastewater.

Valorization of Parthenium hysterophorus weed into biochar for adsorptive removal of industrial dyes from multi-pollutant aqueous systems

Valorization of Parthenium hysterophorus weed into biochar for adsorptive removal of industrial dyes from multi-pollutant aqueous systems

FeCo Alloy Nanoparticles Supported on N-doped Mesoporous Carbon Spheres for Effective Degradation of Antibiotics and Industrial Dyes

Iron (Fe) is widely recognized for its effectiveness in the Fenton reaction and is commonly used in wastewater treatment. However, exploring other metals in similar Fenton-like reactions has been relatively limited. FeCo alloy nanoparticles (NPs), anchored on nitrogen-doped mesoporous carbon spheres (FeCo/NMCS), have been effectively synthesized and used as a Fenton-like catalyst in wastewater treatment under alkaline conditions. The NMCS exhibited spherical with an average diameter of 488.1nm, while the FeCo alloy NPs, uniformly distributed over the NMCS, had an average diameter of 8.2nm. The mesopores served as anchoring points for the NiCo alloy NPs, effectively preventing their possible agglomeration. The NMCS was composed of 3.91wt% nitrogen. With 30mg of FeCo/NMCS and 25mM H2O2, more than 92% of tetracycline hydrochloride (TC) was degraded within 35min at pH levels 7, 9, and 11. The remarkable degradation rate was attributed to the dual active sites present in the FeCo alloys. The rapid degradation of TC, even at pH 11, indicates the potential of FeCo/NMCS as a valuable solution for wastewater treatment under alkaline conditions. Industrial reactive (Y145, R195, B222A) and disperse dyes (O30, R167, B79) with a concentration of 10 ppm were degraded within 20min when using 10mg of the FeCo/NMCS catalyst and 25mM H2O2 at pH 9. After five consecutive TC degradation cycles at pH 7 and 9, the FeCo/NMCS demonstrated consistent performance, emphasizing its reusability. FeCo/NMCS provides a promising solution to pollution control and wastewater treatment with stability, superior catalytic activity, magnetic separability, and recyclability.

Commercial Versus Natural Activated Carbon Fabricated Sheets: Applied to Dyes Removal Application

AbstractIndustrial dyes are considered one of the main causes of increased water pollution of water. Many businesses, such as steel and paper, are located along riverbanks because they require large amounts of water in their manufacturing processes, and their wastes, which contain acids, alkalis, dyes, and other chemicals, are dumped and poured into rivers as effluents. For example, chemical enterprises producing aluminum emit a significant quantity of fluoride into the air and effluents into water bodies. Fertilizer facilities produce a lot of ammonia, whereas steel plants produce cyanide. Many nations consider employing wastewater treatment plants using physical, biological, and chemical methods to clean the wastewater to address environmental crises. The treated water can be used for targeting the irrigation systems in its majority, as it is biologically acceptable for that specific use, industrial dyes are considered one of the leading causes of increased water pollution of water. Many businesses, such as steel and paper, are located along riverbanks because they require large amounts of water in their manufacturing processes, and their wastes, which contain acids, alkalis, dyes, and other chemicals, are dumped and poured into rivers as effluents. For example, chemical enterprises producing aluminum emit a significant quantity of fluoride into the air and effluents into water bodies. Fertilizer facilities produce much ammonia, whereas steel plants produce cyanide. Chromium salts are used in. Many nations consider employing wastewater treatment plants using physical, biological, and chemical methods to clean the wastewater to address environmental crises. The treated water can target the majority of irrigation systems, as it is biologically acceptable for that specific use, which economizes the use of freshwater sources for municipal use. This study presents a novel method for fabricating an efficient adsorbent sheet for wastewater treatment. The sheets are fabricated by combining sugarcane bagasse pulp as a scaffold with commercial, naturally activated carbon, and bimetallic‐prepared adsorbents. Sugarcane bagasse is utilized in producing activated carbon because of its high carbon contents, availability, and low cost. The prepared composite sheets are synthesized and investigated for pollutants removal of crystal violet (CV), methyl orange (MO), and Chromium (CI) dyes. Different weight ratios of activated carbon are used to form a bio‐composite mixed sheet. The formed sheets’ morphology is performed via a high scanning electron microscope (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). To determine the adsorption mechanism, the intra‐particle diffuse screening experiment is used to test the experimental data. All the prepared sheets can retain the pollutants, with the best removal efficiency of 98% for methyl orange adsorption onto the bio‐composite mixed sheet. The results of the parameter (time, concentration, and dose) sets provided valuable proof that the adsorption of methyl orange onto the bio‐composite sheet mixed with naturally activated carbon is an endothermic phenomenon involving physical adsorption.